Heat Decor heating film KIT with thermostat HD-T02 (HD310G, width 100cm, 140W/m²) – 6m², type A connectors
£216.29
Product description – Heat Decor heating film KIT with HD-T02 (HD310G, width 100cm, 140W/m²) – 6m², type A connectors
The Heat Decor heating film set is designed for electric floor and wall heating of rooms. Heating film sets have a basic assortment for the implementation of infrared heating installations. Heating film sets are available in variants that differ in terms of the surface of the heating film and the amount of installation assortment selected for the film surface. Prepared sets of Heat Decor heating films enable quick and convenient selection of the necessary materials for the installation of floor and wall heating in the room.
The Heat Decor heating film model HD310G has a modern heating structure, which guarantees even heat distribution and safe and trouble-free operation.
THE KIT CONTAINS
HD310G.140 heating film | 6m |
Connection set type A | 3pcs. |
LgY 2.5mm² wire - blue | 10m |
LgY 2.5mm² wire - brown | 10m |
Installation box ɸ60mm | 1pcs. |
Protective pipe ɸ16mm | 3m |
Heat Decor self-adhesive tape | 1pcs. |
Thermostat | HD-T02 |
HEATING FILM PARAMETERS
Heating film power [W/lm] | 140 |
Heating film width [cm] | 100 |
Cutting sections every [cm] | 12,5 |
Max. temperature of the heating film [°C] | ~40 |
Voltage [V] | 230 |
Heating film thickness [mm] | 0,338 |
Degree of protection (according to the manual) | IPX7 |
Heating film warranty [years] | 10 |
TECHNICAL DATA OF THE HD-T02 THERMOSTAT
Technical Specifications
- Power supply: 230 V
- Max load: 16 A.
- Built-in battery for maintaining all set control parameters.
- Open window function
- Controlling the temperature of the air and the floor together or separately.
- Days programming (5 + 2) or manual control.
- Flush mounting
- Accuracy: ± 1 ℃
- Hysteresis Range: 1 ° C to 5 ° C
- Air temperature calibration: -9 ° C to 9 ° C
- High floor temperature limitation range: 5-60 ℃
- Room temperature range: 5-35 ℃
- Protection degree: IP20
- Warranty: 24 months
Thermostat operation modes
- IN – Temperature control via internal sensor . The built-in air temperature sensor controls the room temperature, while the floor sensor is turned off. The mode is used in all types of electric heating, except for underfloor heating.
- OU – Temperature control via external sensor . The external NTC temperature sensor monitors the floor temperature, while the room air sensor is off. The mode is used in underfloor heating to control only the floor temperature.
- AL – built-in air temperature sensor controls the temperature in the room and the floor sensor limits the floor temperature. A mode used in electric underfloor heating.
HD-T02 WIRED THERMOSTAT WITH BUILT-IN BATTERY AND AIR AND FLOOR TEMPERATURE SENSOR
Manual wired thermostat with LCD display designed to control electric floor heating or electric heaters. The thermostat is equipped with a built-in air temperature sensor and an NTC wired floor temperature sensor. Intuitive room temperature programming (5 + 2) or manual control. Used for underfloor heating, heating foils, heating panels, heating mats.
The thermostat is equipped with batteries, which enables the maintenance of all set control parameters in the event of a power failure.
The thermostat can control both the room temperature and the floor temperature separately.
When a thermostat is used in underfloor heating, the thermostat turns on the heating system in order to achieve the desired temperature in the room, at the same time not allowing the floor temperature to be exceeded , thus protecting the floor against excessively high temperature.
Note: the device has the ability to calibrate the temperature by phone!
Heating film width
100cm
Cutting sections every
12,5 cm
Heating film power
140W/m²
Max. temp.
~40°C
Weight | 1.25 kg |
---|---|
Width | 100cm |
Power | 140W/m² |
Area | 6m² |